|
|
Post by robertn78 on Jan 16, 2012 21:57:30 GMT -8
1. You realize you are on page 15 of your build.
2. Good on you to find the sensor unplugged. Computer did not tell you?
3. did it not come from the factory welded? I wondered if mine is welded.
|
|
|
|
Post by bobstone2131 on Jan 16, 2012 22:32:53 GMT -8
1.) page 16 now!
2.) No the computer only stated that the voltage was too high or no input. It ran all day with no CEL but alas it is back on. I think I might still need to change the thing out.
3.) No the Fuel Tank Pres Sensor is in a formed plastic tube that comes out of the tank and runs to the evap/charcol can. Probably have to get new rubber hoses and clamps along with the sensor, gonna be another $100 to fix.
|
|
|
|
Post by bobstone2131 on Jan 25, 2012 19:19:34 GMT -8
sometimes forget how much better my car looks lowered till I park next to a stock 2010 FoFo. this one was an SES with factory 17's  |
|
|
|
Post by underclassman on Jan 29, 2012 9:25:32 GMT -8
Ses head and tail light swap!
Your car looks better than an ses and sounds better!
|
|
|
|
Post by eggyolkedzx3 on Jan 29, 2012 11:00:06 GMT -8
I like Bob's car, it doesnt need anything more or anything less in my opinion, well unless its power lol.
|
|
|
|
Post by bobstone2131 on Jan 29, 2012 12:05:17 GMT -8
I do love the SES lights but pretty much done with the car. I am thinking about putting red film on the tails to red them out. And MOAR power is always a goal! But being that I'm a single father raising a wife & 2 kids I'll never have the money to do anything major. The only major thing I can do is tires since I go through at least a set a year!
|
|
|
|
Post by robertn78 on Jan 30, 2012 15:31:03 GMT -8
Also need the SES wing!
|
|
|
|
Post by bobstone2131 on Jan 30, 2012 16:34:34 GMT -8
No Wing for me, I like the clean look of a naked back end!
|
|
|
|
Post by bobstone2131 on Feb 16, 2012 11:31:18 GMT -8
Well everyone, in getting board with the look of the car now. Thinking of going another way with it. Maybe going mild rally style; as in stock height or slight lift suspension, 15" wheels, mud flaps, front skid plate, maybe an SAP wing, even some big fog lights.
Any thoughts?
Mostly need to keep the car more off highway friendly. This new 2-3 year project is not lowered street car friendly at all! that and burning up tires every 9 months sucks.
If I did this I would want to swap out parts for stock suspension to start.
|
|
|
|
Post by 808domi54 on Feb 16, 2012 19:20:34 GMT -8
smh.
|
|
|
|
Post by bobstone2131 on Feb 16, 2012 19:41:28 GMT -8
Here is what my tires look like after 17K miles, I got these back in August! The biggest downside is these tires and most in this size do not have a mileage warranty. It would seem that my Need is far exceeding my Want for go fast FoFo parts.  |
|
|
|
Post by underclassman on Feb 18, 2012 10:52:32 GMT -8
Buy some 16s you can get a 50 series tire with for the mileage warranty
|
|
|
|
Post by eggyolkedzx3 on Feb 18, 2012 11:31:51 GMT -8
Wow, crappy tires it looks like. Also looks like there's a little camber wear on the inside, maybe invest in rear camber/toe arms and set the camber to -0.5 front and rear, front toe in 1/16", and rear toe to what ever spec is. May help for highway?
|
|
|
|
Post by bobstone2131 on Feb 18, 2012 16:30:26 GMT -8
Yep, I have the rear bolts. just need to put them on.
I also have a chance to get an entire 3D Carbon body kit for $125+ shipping!
I might just get the front lip for $80 Shipped!
Anyone want to buy a Netgear WND-4000 wireless N router for $100
|
|
|
|
Post by 808domi54 on Feb 21, 2012 16:30:36 GMT -8
Yep, I have the rear bolts. just need to put them on. I also have a chance to get an entire 3D Carbon body kit for $125+ shipping! I might just get the front lip for $80 Shipped! Anyone want to buy a Netgear WND-4000 wireless N router for $100 I saw a red sedan with a silver 3D Carbon Body kit. I lol'd |
|
