|
|
Post by bobstone2131 on Sept 1, 2011 19:06:37 GMT -8
have you ever used a product called "Trim Black" jeep guys use it for all there plastic and it keeps it from fading so bad.
|
|
|
|
Post by armandzx3 on Sept 1, 2011 19:15:04 GMT -8
No ive never heard of it but thanks for the info. Ill look into it.
|
|
|
|
Post by bobstone2131 on Sept 7, 2011 21:06:22 GMT -8
so whats new with the EG?
|
|
|
|
Post by armandzx3 on Sept 7, 2011 21:25:34 GMT -8
Nothing yet bratha. Still been busy w/the business. Im hoping i should be freed up by this weekend to jump back on her.
|
|
|
|
Post by bobstone2131 on Sept 15, 2011 20:37:39 GMT -8
well, whats new?
|
|
|
|
Post by armandzx3 on Sept 18, 2011 23:04:40 GMT -8
So i will also use this thread to update on the Foci as well. So today i decided to go 'moar low' on the Foci. I dropped the front as low as i could get it before it started touching. The rear though...for some reason that i cannot comprehend will not drop. At least the rear left wont. I dropped the locking collar and spring perch as low as they could go for the spring and then lowered the struts evenly. BUT the right rear dropped and the left didnt. From the ground to the bottom of the fender, the right side is at 23 1/2" and the left is at 24" even after i messed w/it twice. I took it for a drive for a while each time to allow everything to settle in but no difference in the left side.  Not sure whats going on but imma have to take it apart again tomorrow. Well heres a teaser pic of the front. Ill get better pics tomorrow in the daylight.  |
|
|
|
Post by bobstone2131 on Sept 19, 2011 12:06:38 GMT -8
Nice, just find a really bumpy road and run it hard! lol
maybe the adjuster/base is not fully seated in the LCA?
|
|
|
|
Post by armandzx3 on Sept 19, 2011 17:45:19 GMT -8
Thats what imma check tonight. Imma take it all apart again.
|
|
|
|
Post by armandzx3 on Sept 19, 2011 18:04:32 GMT -8
Ok, so heres some more pictures of the Foci.     The left rear:  Right rear:  Its about 1/2" difference. The left did lower a bit more by the time i got home this evening from work so maybe its just taking a lot longer to settle. |
|
|
|
Post by bobstone2131 on Sept 19, 2011 19:13:54 GMT -8
MOAR LOW!
|
|
|
|
Post by armandzx3 on Sept 19, 2011 20:18:30 GMT -8
I know!!!! I dont know why the rear wont drop any further. imma wait till me weekend so i can spend all day tweeking it and driving around to see how it settles. The front is good for now.
|
|
|
|
Post by 808domi54 on Sept 19, 2011 23:24:09 GMT -8
That would look so good with a SVT wing. I think it's too low in the front. Once you get the back all evened out I think it'll look better. P.S: I'm slowly starting to fall in love with your car for some reason.  |
|
|
|
Post by eggyolkedzx3 on Sept 19, 2011 23:27:39 GMT -8
I think it looks super clean the way it is, good job! What coils are you running?
|
|
|
|
Post by bobstone2131 on Sept 20, 2011 6:11:46 GMT -8
Hes running a full Ksport setup!!!
|
|
|
|
Post by armandzx3 on Sept 20, 2011 21:43:09 GMT -8
That would look so good with a SVT wing. I think it's too low in the front. Once you get the back all evened out I think it'll look better. P.S: I'm slowly starting to fall in love with your car for some reason. Yeah once its all evened out it'll look better. I just like my vehicles being very low. x2 on the SVT wing idea. I was checking out all the SVT's at the cruise and liked how the wing look. Lol, thanks for the luv.  |
|
Not sure whats going on but imma have to take it apart again tomorrow. Well heres a teaser pic of the front. Ill get better pics tomorrow in the daylight.
